Table of Contents
Advertisement
Search Screen
Designation of a Part to Search
: Designate the part to search on the screen.
To search the changed image in a specific area of the selected camera, it is required to
designate the part of the image to search.
Time Selection
: Select the starting time and Ending Time to search a specific area of the selected camera.
Selecting time is to display the graph of the data related to the motion detected in the
selected part of the image.
[Notice]
If many motions are dectected in the selected part from 00 to 24, it may take long to
extract the data on that part. Therefore, it is recommanded to select thetme zone to
search.
Display of graph in a Designated Part
: Display the graph of the data related to the motions detected in he designated part of he
selected camera during the selected time.
When you select the graph display button, the processing screen is displayed while the data
the motion is extracted.
4-9
Stop Graph Display
: Stop the display of a graph and extraction of data related to motions.
If you select [Stop] button while data related to motions on the selected part is searched,
only the graph of searchred data is displayed in the graph part.
Display tje graph of the searched data in a seleced part.
: If the data search related to the motions is completed, the yellow graph of the searched data
is overlapped on the exiting graph this is previously saved.
To search the changed image in a specific area of the selected camera, it is required to
designate the part of the image to search.
Graph for the searched data in a selected part.
Start the search of a selected part
: Search the data graph of a selected part by time setting and area setting of a selected camera.
Select the displayed graph of a selected part and press Play button, and you can immediately
search only the images on the parts where the motions are detected.
[Notice]
The minimum unit for the display on a graph is one minute. And the squential data is displayed.
However, during the actual search, the data may not be sequential according to the recording
by motions.
4-9
Advertisement
Table of Contents
