Table of Contents
Advertisement
Appendix
1
Formatting a CD using
Direct CD
[Formatting CD using Direct CD]
When you try to backup on an unformatted CD or in case where the message of backup failure
has shown, format the CD as follows.
Below contents is based on Direct CD v5.1. If some other message comes up, please refer
to Direct CD manual.
CD format and backup
Select [Media Select] button in "Backup Media" -> Select CD-R/RW drive in "Local Drive"
-> Click [OK]
Insert empty CD-R/RW media and click [Format CDR/CDRW]
(If CD-R/RW drive is set as "auto" Direct CD program will run automatically.)
Check if CD-R/RW is selected when the Direct CD format utility comes up, Direct CD and
click [format CD]
5-1
When you see a "drive format" window, input a name to "Label" and click [Start
Format] button
"Formatting CD.." Window will appear and starts CD-R/RW media format.
When the format is done, below window will appear saying "CD Ready". Then click [OK]
5-1
Advertisement
Table of Contents
