Modifying G-Code Programming; Using The Timer Programming Feature - Samsung DVD-V70 Instruction Manual

VCR

Modifying G-CODE Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
ENU
GB
If you wish to...
Select an input source other
than the tuner (LINE IN 1 or LINE IN 2)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
36
a second time to confirm.
Then...
Press the ➛ or ❿ buttons, until the
PR selection flashes.
Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
• The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
The input source must be selected before changing any
other value.
Press the ➛ or ❿ buttons, until the DAY selection flashes.
Press the or buttons, until the (Daily) value is
DLY
❷
displayed.
Press the ➛ or ❿ buttons, until the
DAY selection flashes.
Press the or buttons, until the W- (Week) value is
❷
displayed, followed by the required day.
Example: (Weekly Saturday)
W-SA
Press the ➛ or ❿ buttons, until the
STOP selection flashes.
Press the or buttons to increase or decrease the stop
❷
time.
Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
Press the or buttons until the correct indication is
❷
displayed:
• AUTO
(Auto Tape Speed Select) : see page 37
• SP
(Standard Play)
• LP
(Long Play)

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result: The TIMER PROGRAMMING menu is displayed.
2 Press ❿ to select the input source.
3
Select the required station by pressing the , buttons or
❷
INPUT SEL. to select the LINE1, LINE2 input sources.
4 Press ❿ to select the recording day.
5
Select the required day by pressing the or buttons.
❷
6 Press ❿ to select the recording start time.
7 Select the required hour value by pressing the or buttons.
❷
8 Press ❿ to select the minutes.
9
Select the required minute value by pressing the or
❷
10 Press ❿ to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
12
13 Press the or buttons to select the SP (Standard Play),
❷
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
14
When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
VCR
Timer Method
Standard
G-Code
GB
buttons.
or
❷
STANDBY/ON OPEN/CLOSE
15
LP
37