Modifying G-Code Programming - Samsung SV-DVD54T Instruction Manual

Modifying G-code Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
If you wish to...
Select an input source other
than the tuner (LINE 1 or LINE 2)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
a second time to confirm.
ENU
Then...
Press the ➛ or ❿ buttons, until the PR selection flashes.
Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
•
The LINE 1 or LINE 2 source using the INPUT
SEL. button for a satellite tuner or external video
source
The input source must be selected before changing any other
value.
Press the ➛ or ❿ buttons, until the DAY selection flashes.
Press the or buttons, until the DLY (Daily) value is
❷
displayed.
Press the ➛ or ❿ buttons, until the DAY selection flashes.
Press the or buttons, until the W- (Week) value is
❷
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Press the ➛ or ❿ buttons, until the STOP selection flashes.
Press the or buttons to increase or decrease the stop
❷
time.
Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
Press the or buttons until the correct indication is
❷
displayed:
•
AUTO (Auto Tape Speed Select) : see page 21
•
SP (Standard Play)
•
LP (Long Play)
ENG-20