Modifying Showview Programming (Dvd-V6400/Dvd-V6500) - Samsung DVD-V5450 User Manual

6 If the programme and times are correct, press the
OK button.
Press the STANDBY/ON button to activate the
7
timer.
• The numbers next to each TV programme listing
are ShowView code numbers, which allow you to
programme your DVD-VCR instantly with the
remote control. Tap in the ShowView code for the
programme you wish to record.
• Refer to page 36~37 if you wish to:
- Check that your DVD-VCR has been
programmed correctly
- Cancel a preset recording
ShowView is a trademark of Gemstar Development
Corporation. The ShowView system is
manufactured under licence from Gemstar
Development Corporation.
Modifying ShowView
Programming
(DVD-V6400/DVD-V6500)
If you wish to correct the programme displayed or
modify certain elements, such as the recording speed,
you can do so before you press the RETURN button.
If you wish to... Then...
1 Press the œ or √ button to select PR.
Select an input
source (AV1, AV2 2 Press the INPUT SEL. button to select AV1,
or AUX(DVD- AV2, or AUX(DVD-V6500).
V6500)) other • The input source must be selected before
than the tuner changing any other value.
Record a 1 Press the œ or √ button to select Day.
programme every 2 Press the ... or † button to select DLY (Daily).
day (Monday to
Sunday) at the
same time
Record a 1 Press the œ or √ button to select Day.
programme every 2 Press the ... or † button to select the
week on the
required day.
same day and at
DLY : Daily
the same time
W-SU : Weekly Sunday
W-MO : Weekly Monday
W-TU : Weekly Tuesday
W-WE : Weekly Wednesday
W-TH : Weekly Thursday
W-FR : Weekly Friday
W-SA : Weekly Saturday
SA 01 : Saturday 01
Extend the 1 Press the œ or √ button to select the
recording time
recording stop time.
2 Press the ... or † button to set the time.
Select the 1 Press the œ or √ button to select Speed.
recording speed 2 Press the ... or † button to select the
required speed.
Auto ➝ SP (Standard Play) ➝ LP (Long Play)
Select the 1 Press the œ or √ button to select V/P
VPS/PDC
(VPS/PDC).
recording 2 Press the ... or † button to select On.
• Do not select V/P unless you are sure the
programme you wish to record is broadcast
with VPS/PDC. If you do set V/P to On, then
you must set up the start-time exactly
according to the published TV schedule.
Otherwise the timer recording won't take
place.
English - 33