Changing The Preset Station Table; Setting The Dvd-Vcr Output Channel - Samsung CHT-350 Instruction Manual

VCR

Changing the Preset Station Table

GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
MAIN MENU
1
2
INSTALLATION
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
3
4
INSTALLATION
5
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
6
RETURN œ ❷¤¤¤ ENTER
7
TV STATION TABLE
PR CH NAME SYSTEM
1 003
2
3
4
5
8
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
œ ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
9
TV STATION TABLE
PR CH NAME SYSTEM
1
2
3 003
4
5
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
œ ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
22
Press the SETUP button on the remote control.
or ➛, ❿ buttons to select the
Press the corresponding ,
œ ❷
Install option.
Press the ENTER button to select this option.
Result: The menu is displayed.
INSTALLATION
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
Press the corresponding or buttons, until the cursor is placed
œ ❷
on the required preset TV programme.
Result: The selected station is displayed at the same time on
the television screen.
To change the programme number assigned to a station (PR3
instead of PR1 for example):
Press ENTER
Press the œ or ❷ buttons until the cursor is placed on the
programme to which the station is to be moved
Press ENTER again
You can modify this station by repeating the same procedure from
6
Step onwards.
On completion, press the RETUTN button three times to exit the
menu.
Selecting the RF OUT Sound Mode (B/G-D/K-I)
You can choose the sound mode (B/G , D/K or I) according to the
TV set connected to your VCR.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷
option.
INSTALLATION
3
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the œ or ❷ buttons, until the TV SYSTEM option is
selected.
Press the ➛ or ❿ button to select G, I or K.
5
6 On completion, press RETURN to exit the menu.

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
Install option.
3
Press the ENTER button to select this option.
Result: The menu is displayed.
INSTALLATION
4
Press the œ or ❷ buttons, until the cursor is placed on the
OUTPUT CH option.
5
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
VCR
GB
MAIN MENU
INSTALLATION
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
INSTALLATION
AUTO SET UP
G
MANUAL SET UP
TV SYSTEM :G I
VCR OUTPUT CH :CH36
K
➛¤❿
œ ❷¤¤
RETURN
VCR
MAIN MENU
INSTALLATION
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
INSTALLATION
AUTO SET UP
VCR
MANUAL SET UP
TV SYSTEM :G
CH21
VCR OUTPUT CH :CH36
CH36
➛¤❿¤¤
CH69
RETURN œ ❷
23