Table of Contents
Advertisement
VCR
Changing the Preset Station Table
Language
: English
Install
User Set
GB
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
TV System
: G
VCR Output CH
: CH 36
TV STATION TABLE
PR
CH
NAME
1
021
- - - -
2
3
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
TV STATION TABLE
PR
CH
NAME
1
2
3
021
- - - -
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
22
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
#
❷
option.
3
Press the OK or ❿ buttons to select this option.
Result:
The
Install
menu is displayed.
4
Press the corresponding
or
buttons, until the
#
❷
Setup
option is selected.
5
Press the OK or ❿ button to select this option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the corresponding
or
buttons, until the required
#
❷
preset TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8
Press the
or
buttons to select required position.
#
❷
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
Selecting the RF OUT Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according to the
TV set connected to your VCR.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
Install
3
Press the OK button to select this option.
Result:
The
4
Press the
or
#
selected.
Manual
5
Press the OK or ❿ button to select G or K.
6
On completion, press RETURN three times to exit the menu.
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The
4
Press the
or
#
is selected.
5
Select the required output channel (CH21~CH69) by pressing
the OK or ❿ buttons.
CH21
6
On completion, press RETURN three times to exit the menu.
Then tune your television again (see page 14).
,
buttons to select the
Install
#
❷
Install
menu is displayed.
buttons, until the
TV System
option is
❷
,
buttons to select the
Install
#
❷
Install
menu is displayed.
buttons, until the
VCR Output CH
option
❷
. . CH36
. . CH69
VCR
Language
: English
Install
User Set
GB
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
G
TV System
: G
K
VCR Output CH
: CH 36
VCR
Language
: English
Install
User Set
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
CH 21
TV System
: G
:
VCR Output CH
: CH 36
CH 36
:
CH 69
23
Advertisement
Table of Contents
