Changing The Preset Station Table - Samsung CHT-500 Instruction Manual

VCR
GB
Language
Install
User Set
Auto Power Off
Screen Messages
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR CH
1 021
2
3
4
5
DELETE : CLEAR
TV STATION TABLE
PR CH
1
2
3 021
4
5
DELETE : CLEAR
22
Downloaded From TheatreSystem-Manual.com Manuals

Changing the Preset Station Table

You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
: English
: Off
: On
Install
: G
: CH 36
NAME DEC
- - - - OFF
SWAPPING : OK
RETURN
NAME DEC
- - - -
OFF
SWAPPING : OK
RETURN
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ buttons to select this option.
Result: The
Install
4
Press the corresponding
Setup option is selected.
Press the OK or ❿ button to select this option.
5
Result: The
TV STATION TABLE
6
Press the corresponding
preset TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8
Press the or buttons to select required position.
# ❷
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
, buttons to select the
# ❷
menu is displayed.
or buttons, until the
# ❷
menu is displayed.
or buttons, until the required
# ❷
Install
Manual