Configuration Tasks - Cisco ASR 1000 Series Software Configuration Manual

Configuring the 4-Port Serial Interface SPA
This chapter provides information about configuring the 4-Port Serial Interface SPA on Cisco ASR 1000
Series Routers.
•
•
•

Configuration Tasks

This section describes how to configure the 4-Port Serial Interface SPA for the Cisco ASR 1000 Series Routers
and verify the configuration. For information about managing your system images and configuration files,
refer to the following:
•
•
•
Configuring the 4-Port Serial Interface SPA
To configure the 4-Port Serial Interface SPA, complete these steps:
SUMMARY STEPS
1. Router# configure terminal
2. Router(config)# interface serial slot/subslot/port
3. Router(config-if)# ip address address mask
4. Router(config-if)# clock rate bps
OL-14127-17
Configuration Tasks, page 277
Verifying the Interface Configuration, page 287
Configuration Examples, page 288
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Cisco IOS Configuration Fundamentals Configuration Guide
Cisco IOS Configuration Fundamentals Command Reference
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
18
C H A P T E R
Everest 16.5
277