Garmin G1000 Columbia 350 Cockpit Reference Manual page 133

FMS Knob to select the desired flight plan (already
stored in memory), by number. Turn the large FMS
Knob to highlight the 'LEG' field and turn the small
FMS Knob to select the desired leg of the flight plan,
or select 'CUM' to apply trip planning calculations
to the entire flight plan. Selecting 'FPL 00' will
display an active flight plan. If an active flight
plan is selected, 'REM' will be an available option
to display planning data for the remainder of the
flight plan.
NOTE: The Page Mode must be set to MANUAL
to perform the following steps.
5) Turn the large FMS Knob to highlight the departure
time (DEP TIME) field.
NOTE: The departure time on the Trip Planning
Page is used for preflight planning. Refer to the
Utility Page for the actual flight departure time.
6) Turn the FMS Knobs to enter the departure time.
Press the ENT Key when finished. (Departure time
may be entered in local or UTC time, depending
upon system settings).
7) Turn the FMS Knobs to enter the fuel flow. Press
the ENT Key when finished. Note that in automatic
page mode, fuel flow is provided by the system.
8) The flashing cursor moves to the fuel on board field.
Turn the FMS Knobs to modify the fuel on board.
Press the ENT Key when finished. In 'AUTOMATIC'
mode, fuel onboard is provided by the entry made
in 'GAL REM' on the EIS System Page.
9) The flashing cursor moves to the calibrated airspeed
field. Turn the FMS Knobs to enter a calibrated
airspeed. Press the ENT Key when finished.
190-00567-01 Rev. A Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
SECTION 8 – FLIGHT PLANNING
8-9