WS-AP3660 Power Supply Installation Procedures
3.
Insert the sheathed cable through the sealing nut, clamp ring, seal, and body.
4.
Insert the cable conductors into the housing assembly using the pin out diagram shown in
Figure
Figure 2-16
1
Pin 1 - Hot
2
Pin 2 - Not used
5.
Secure the wires by tightening the single lock nut with a 1.5 mm (Hex) driver.
1
Lock nut
2-16.
Power Cable Pin Out Diagram
3
Pin 3 - Neutral
4
Pin 4 - Ground
Enterasys Wireless Outdoor WS-AP3660 Installation Guide 2-17
Installation