Table of Contents
Advertisement
Installation
Figure 2-12
1
Vertical bracket on vertical pole
2
Horizontal bracket on vertical pole
2.
Feed the supplied stainless steel tie back straps through the openings in the mounting bracket
(see
3.
Feed the free end of the strap around the pole.
4.
Tighten the tensioning screw to adapt the strap to the diameter of the pole.
Connecting the DC Power Supply to the WS-AP3660
To connect the power supply to the WS-AP3660:
1.
Locate the DC to DC cable (provided with the power supply).
2.
Insert one end of the DC to DC cable into the DC connector port on the WS-AP3660 (see
Figure 1-3
3.
Screw on and hand tighten the knurled knob securely.
4.
Insert one end of the DC to DC cable into the DC connector on the bottom of the WS-AP3660
Power Supply (see
2-14
Power Supply Pole Mount Options
Figure 2-5
on page 2-7).
Note: The maximum distance between the WS-AP3660 and Power Supply is 1 meter (see
Figure 2-14
on page 2-15).
on page 1-3 for the location of the DC connector).
Figure 2-13
WS-AP3660 Power Supply Installation Procedures
3
Horizontal bracket on horizontal pole
on page 2-15).
Hide quick links:
Advertisement
Table of Contents
