Table of Contents
Advertisement
operated in the 2.4 GHz and 5 GHz frequency ranges. This device must not be co-located or
operated in conjunction with any other antenna or transmitter.
The radiated output power of the WS-AP3660 is below the FCC radio frequency exposure limits as
specified in "Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields" (OET
Bulletin 65, Supplement C). This equipment should be installed and operated with a minimum
distance of 25 cm between the radiator and your body or other co-located operating antennas.
External Antennas
The external antennas used with the WS-AP3660 must be approved and certified before use.
However, in order to comply with the local laws and regulations, an approval may be required by
the local regulatory authorities.
For a list of approved external antennas, see
page B-10.
RF safety distance
The antennas used for this transmitter must be installed to provide a separation distance of at least
25 cm from all persons and must not be co-located or operating in conjunction with another
antenna or transmitter.
Professional Installation Notice
To comply with FCC part 15 rules in the United States, the system must be professionally installed
to ensure compliance with the Part 15 certification. It is the responsibility of the operator and
professional installer to ensure that only certified systems are deployed in the United States. The
use of the system in any other combination (such as co-located antennas transmitting the same
information) is expressly forbidden.
Canada
Industry Canada Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus,"
ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils
Numeriques," NMB-003 edictee par le Industrie Canada.
This device complies with Part 15 of the FCC Rules and Canadian Standard RSS-210. Operation is
subject to the following conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause
undesired operation.
•
This Class B digital apparatus complies with Canadian ICES-003.
•
Operation in the 5150-5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
•
Please note that high power radars are allocated as primary users (meaning they have
priority) and can cause interference in the 5250-5350 MHz and 5470-5725 MHz bands of LE-
LAN devices.
•
For the product available in the Canadian market, only channels 1 to 11 can be operated.
Selection of other channels in the 2.4 GHz band is not possible.
"WS-AP3660 Approved External
Enterasys Wireless Outdoor WSAP3660 Installation Guide B-3
WS-AP3660
Antennas" on
Hide quick links:
Advertisement
Table of Contents
