Installation
6.
Screw the body into the housing assembly and tighten.
7.
Screw the sealing nut into the body and tighten.
8.
Insert the assembled AC connector into the AC power receptacle on the power supply (see
Figure 2-13
9.
Screw on and hand tighten the knurled knob securely.
10. Insert the plug into the AC power source.
This completes the installation of the WS-AP3660.
2-18
on page 2-15).
Electrical Hazard: The connection to the AC power source should be made by a properly trained
and licensed electrician in accordance with local codes and regulations.
WS-AP3660 Power Supply Installation Procedures