Network and Power Connections
•
Power over Ethernet (PoE)
Power is provided through the RJ45 Ethernet port (LAN port) on the back of the WS-AP3705i.
This is the preferred method of powering the AP on ceiling and high wall installations.
•
Power by external power supply
Where a PoE-capable Ethernet connection is unavailable or impractical, an external 48V DC
power supply may be ordered separately to power the WS-AP3705i from a standard AC wall
outlet. For more information on the installation process, see the section entitled
the DC Power Supply to the
Connecting the DC Power Supply to the WS-AP3705i
There is no wall mount for a DC power supply. To connect the power supply to the WS-AP3705i
for everyday operation, mount the AP and plug in the power supply as described in the section,
"Mounting the WS-AP3705i to a
configuration and maintenance, plug the power cable from the DC power supply into the DC
connector on the back of the WS-AP3705i.
2-10 Installation
Note: Currently, the DC connector on the back of the WS-AP3705i is non-functional.
(Currently,Non-functional)
WS-AP3705i" below.
Wall," on page 2-6. If you have taken the AP off its mount for
Draft
"Connecting