Reverse Tracking Function (Horizontal Mode Only) - Furuno CH-500 Operator's Manual

1. OPERATIONAL OVERVIEW
1.16.4

Reverse tracking function (Horizontal mode only)

You can manually change the train direction at any time. This allows you to re-check
an area that was recently swept. This tracking method is available for all Horizontal
modes and the Vertical mode.
1. Referring to section 1.16.1, set the tracking method to [Reverse].
2. To reverse the train direction, press the Tracking button. The train now moves in
reverse.
Each time the button is pressed, the indication "REVERSE" appears for approximately
three seconds at the top of the echo display area, and the train is reversed.
Note: You can also change the train direction with the REVERSE button ( ).
1-25