5.12
How to Adjust the Speaker Settings
The optional speaker is available for use with your CH-500/CH-600. By connecting a
speaker, you can "hear" fish echoes, which allows you to move about your ship freely
while fishing.
You can change the following settings for the speaker: output frequency, output band-
width, harmonic pattern and doppler shift filter.
In most cases, these settings are done during the first voyage after installation, and
require almost no adjustment once set.
5.12.1
How to adjust the speaker frequency
To adjust the output frequency for the speaker, do the following:
1. Referring to section 5.5, open the [System] menu.
2. Press
pears.
3. [Audio FREQ.] is already selected. Press
The available range is 0.90 kHz to 1.20 kHz.
4. Press the MENU key twice to close the menu.
5.12.2
How to select the speaker bandwidth
You can customize the sound bandwidth to suit your preferences.
To set the output bandwidth, do the following:
1. Referring to section 5.5, open the [System] menu.
2. Press
pears.
3. Press
4. Press
• [Wide]: Sound output is based on a wide bandwidth. Auto Filter settings are
more effective with this setting.
• [Std.]: Default setting. Sound output is based on a normal bandwidth. Auto Filter
settings are effective with this setting.
• [Narrow]: Sound output is based on a narrow bandwidth. Auto Filter settings
have low effect with this setting.
5. Press the MENU key twice to close the menu.
or
to select [Audio], then press
1. 0 0
Audio FREQ.
:
Bandwidth
:
Wide
Harmonic Pattern
:
1
Auto Filter
:
Off
Audio Priority
:
High FREQ
: Select
: Change
or
to select [Audio], then press
or
to select [Bandwidth].
or
to select the required bandwidth. The available options are:
. The [Audio] settings window ap-
Audio
k H z
(0.90 ~1.20 kHz )
Std.
Narrow
( 1 ~ 3 )
On
For CH-600 only
For CH-600 only
Low FREQ
Menu: Apply
or
to show adjust the frequency.
. The [Audio] settings window ap-
5. MENU OPERATIONS
5-11