Furuno CH-500 Operator's Manual page 101

5 ES
├
TVG Level-LF (0.0 to 10.0; default: 4.0 )
├
TVG Level-HF (0.0 to 10.0; default: 4.0 )
├
TVG Distance-LF (0.0 to 10.0; default: 4.0 )
├
TVG Distance-HF (0.0 to 10.0; default: 4.0 )
├
Gain ADJ.-LF (-10 to +10; default: 0 )
├
Gain ADJ.-HF (-10 to +10; default: 0 )
├
RES. Color-LF (LOG , Linear, Square, Cube)
├
RES. Color-HF (LOG , Linear, Square, Cube)
├
Clutter-LF (0 , 1, 2, 3)
├
Clutter-HF (0 , 1, 2, 3)
└
A-Scope (Off , On)
6 FUNC Key
├
Key1 (Preset Key)
├
Key2 (VERT Search , Delete Mark,)
└
Key3 (VERT Search, Delete Mark)
7 System
├
System Setting
│ ├
System Setting 1
│ │ ├
Positon Display (Ship's L/L , Cursor L/L)
│ │ ├
Track (Off, On )
│ │ ├
Current Data (Off , Inbound, Outbound)
│ │ ├
Heading Indication (True , Azimuth)
│ │ ├
Display Range Ring (Off, On )
│ │ ├
North Mark (Off , On)
│ │ ├
CSE. Data (Nav. , Gyro)
│ │ ├
Nav. Data (GPS , Other)
│ │ ├
NMEA1 Baudrate (4800 , 9600, 19200, 38400)
│ │ ├
NMEA2 Baudrate (4800 , 9600, 19200, 38400)
│ │ ├
TVG Correction (Off , 1/2, 1/1)
│ │ ├
Units (m , ft, fm, HR, pb)
│ │ ├
Temp Display (ºC , ºF)
│ │ ├
Temp Graph (Off , 20min, 60min)
│ │ └
TLL Output (Off , On)
│ ├
System Setting 2
│ │ ├
Gain Setting Protect (Off , On)
│ │ ├
Emphasis Mode (Off, Normal , Red)
│ │ ├
Stabilizer (Off, On(Std.) , On(Gyro))
│ │ ├
Auto Retract (Off, 5 to 15; default: Off )
│ │ ├
Speed Alarm Message (Off, On )
│ │ ├
Sweep Indicator (Dot, Line )
│ │ ├
Menu BKGD. Transp. (Off, 1 to 5; default:5 )
│ │ ├
FUNC Key1 (Preset Key, Short-Cut Key )
│ │ ├
FUNC Key2 (Preset Key, Short-Cut Key)
│ │ ├
FUNC Key3 (Preset Key, Short-Cut Key)
│ │ └
Default Settings (No , Yes)
│ └
System Setting 3
│ ├
HOR./HISTORY (Off, On )
│ ├
HOR./VERT (Off, On )
│ ├
HOR./VERT ZOOM (Off, On )
│ ├
Full A-Scope (Off, On )
│ └
HOR./Full A-Scope (Off, On )
│
(Continued from previous page)
(Continued on next page)
APPENDIX 1 MENU TREE
AP-5