Table of Contents
Advertisement
Operation
Needle positioning button (3)
When this button (3) is activated, the needle moves to a specific
position. This position is determined individually via the parameter
settings. For more information, read the Service Instructions.
The machine comes configured so that selecting the button (3)
will bring the needle up.
Bartack suppression button (4)
This button (4) cancels the general setting for sewing start and
end bartacks. If bartacks are on, pressing the button (4) skips the
next bartack. If bartacks are off, pressing the button (4) sews the
next bartack. For general settings for sewing start and end bart-
acks, read the Instructions for use for the DAC basic/classic
control.
Stitch length button (5)
When this button (5) is activated, the machine sews with the longer
stitch length set on the upper stitch adjusting wheel.
Auxiliary thread tensioning button (6)
This button (6) activates the auxiliary thread tensioner.
Button for assigning an optional equipment function (7)
The control of the machine can be used to assign this button an
optional equipment function (e.g. needle cooling).
60
Operating Instructions 967 - 02.0 - 11/2016
Advertisement
Table of Contents
