Table of Contents
Advertisement
Operation
Operating Instructions 967 - 02.0 - 11/2016
Information
If the stitch adjustment lever is only pushed down lightly, the stitch
length will be reduced proportionally with the angular position.
The stitch length is 0 when the stitch adjustment lever is at the
center.
If the stitch adjustment lever is pushed down further, the stitch
length will turn negative, causing the machine to sew in reverse.
Semi-automatic bar tacking
To complete a semi-automatic bartack:
1.
Press the button for bar tacking (1).
Reverse sewing will remain active for as long as the button
is pressed.
Semi-automatic bar tacking with foot button (optional)
To complete a semi-automatic bartack using the foot button:
1.
Press the foot button (2).
Reverse sewing will remain active for as long as the foot
button is pressed.
Fully automatic bar tacking
Fully automatic bar tacking is activated on the OP1000 control
panel (5). For programming instructions, see Instructions for
use DAC basic/classic.
To complete a fully automatic bartack:
1.
Activate start and end bartack including the corresponding
number of stitches.
2.
Press the pedal (3).
The machine automatically sews a start bartack.
3.
To complete the seam, press the pedal (3) backwards.
The machine automatically sews an end bartack and
completes the seam.
57
Advertisement
Table of Contents
