Fresenius Medical Care 2008K Operator's Manual page 67

1) The electrolyte profile of the
highlighted selection is
displayed in this column.
Note: If the machine is set up
for use with Citrasate®, a
'Citrate' meter box will be
displayed in the dialysate
constituent list.
2) Highlight the desired
selection by scrolling through
the choices using the  or 
(up or down) keys on the data
entry keypad. Acetate
formulations can also be
selected as a treatment option.
3) When the desired type is highlighted, press
the CONFIRM key on the control panel to save
the selection and return to the "Dialysate" screen.
Note: Be sure the acid/bicarbonate concentrates
connected to the machine match the type
selected from the Concentrate menu.
4) Enter the prescribed Base Na+
and Bicarbonate values as
described in "Setting Treatment
Parameters."
Note: The Bicarbonate button
displays the available bicarbonate
in the Final Dialysate (post-
reaction of the acid and
bicarbonate concentrates).
Figure 30 – Entering Concentrate Information
2008K Hemodialysis Machine Operator's Manual Rev P
Chapter 3—Setting Treatment Parameters
67