1-4-11. Refl ector Assembly
1. Open the panel (U4) block assembly. (Refer to steps 1 and 2 in Section 1-3-9.)
2. Loosen the fi ve screws (with drop-safe), then remove the maintenance cover assembly.
3. Remove the three screws (PSW4 x 10), then remove the REF fi xing plate assembly.
4. Remove the three screws (PSW4 x 10), then remove the refl ector assembly.
Maintenance cover
assembly
Screws (with drop-safe)
5. To install, reverse the removal procedure.
SRX-R320
PSW4 x 10
PSW
4 x 10
PSW4 x 10
PSW4 x 10
REF fixing plate assembly
Reflector assembly
Fig. 1-4-11
Panel (U4) block assembly
1-35 (E)