Panel (U1B); Panel (U1) - Sony SRX-R320 Service Manual

1-3-7. Panel (U1B)

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U6). (Refer to Section 1-3-5.)
4. Remove the six screws, then lower the panel (U1B) in
the direction of the arrow 1.
5. Remove the panel (U1B) in the direction of the arrow
2.
6. To install, reverse the removal procedure.

1-3-8. Panel (U1)

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U6). (Refer to Section 1-3-5.)
4. Remove the panel (U1B). (Refer to Section 1-3-7.)
5. Remove the eight screws, then remove the panel (U1)
in the direction of the arrow.
6. To install, reverse the removal procedure.
SRX-R320
Screws
Panel (U1B)
2
Fig. 1-3-8
Screws
Screws
Panel (U1)
Screws
Fig. 1-3-9
1
Screws
Screws
1-7 (E)