Cold Mirror - Sony SRX-R320 Service Manual

1-4-13. Cold Mirror

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U3). (Refer to Section 1-3-4.)
4. Loosen the screw (with drop-safe).
5. Remove the screw (PSW4 x 40), the helical compres-
sion spring and the spacer pipe, then remove the cold
mirror assembly.
6. Remove the three screws (PSW3 x 6), then remove the
three mirror springs and the cold mirror.
7. To install, reverse the removal procedure.
m
. When attaching the cold mirror, pay attention to the
direction of it.
. When attaching the cold mirror, be careful not to
damage or soil it.
SRX-R320
Mirror spring
PSW3 x 6
Mirror spring
Notch
Cold mirror assembly
Fig. 1-4-13
PSW4 x 40
Helical compression
spring
Spacer pipe
Screw
(with
drop-safe)
Cold mirror assembly
Cold mirror
1-37 (E)