1-4-4. LRD-001
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Open the panel duct block assembly. (Refer to steps 3 and 4 in Section 1-4-3.)
4. Remove the unit cover (TOP). (Refer to step 7 in Section 1-4-1.)
5. Remove the three screws, then remove LRD-001.
6. To install, reverse the removal procedure.
1-24 (E)
PSW
4 x 16
LRD-001
Fig. 1-4-4
SRX-R320