1-3-11. Panel (U8)
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U3). (Refer to Section 1-3-4.)
4. Remove the panel (U6). (Refer to Section 1-3-5.)
5. Remove the panel (U5). (Refer to Section 1-3-6.)
6. Remove the two screws, then remove the STL cover.
7. Remove the eight screws, then remove the panel (U8).
Screws
8. To install, reverse the removal procedure.
STL cover
Screws
Panel (U8)
Screws
Fig. 1-3-13
1-11 (E)
SRX-R320