Ricoh C2000 Service Manual page 64

documents have not reached their intended destinations if sent to the wrong e-mail addresses, for
example.
0: Prints 1st page only.
1: Prints all pages.
Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the transmission
was received normally at the destination.
00: "Dispatched"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with "dispatched"
in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The "dispatched" string is included in the Subject string.
01: "Displayed"
2-3
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with "displayed"
in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The "displayed" string is included in the Subject string.
10: Reserved
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to "00" (for "dispatched")
received by Microsoft Outlook 2000 may cause an error. If any setting other than
"displayed" (01) causes a problem, change the setting to "01" to enable normal sending of the
Return Receipt.
Media accept feature
This setting adds or does not add the media accept feature to the answer mail to confirm a
reception.
4
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
Use this bit switch if a problem occurs when the machine receives an answer mail, which contains
the media accept feature field.
5-6 Not Used
Image Resolution of RX Text Mail
7
This setting determines the image resolution of the received mail.
Bit Switches
4
63