Ricoh C2000 Service Manual page 100

Address
680547 Country dial tone permissible drop time
680548 Country dial wait interval (LOW)
680549 Country dial wait interval (HIGH)
Time between opening or closing the DO
68054A
relay and opening the OHDI relay
68054B Break time for pulse dialing
68054C Make time for pulse dialing
Time between final OHDI relay closure
68054D
and DO relay opening or closing
Minimum pause between dialed digits
68054E
(pulse dial mode)
Time waited when a pause is entered at
68054F
the operation panel
680550 DTMF tone on time
680551 DTMF tone off time
Tone attenuation level of DTMF signals
680552
while dialing
Function Unit
20 ms -
See Notes 3, 6 and 8.
1 ms SP2-103-012 (parameter
11).
See Note 3.
1 ms
SP2-103-013 (parameter
12).
See Note 3.
1 ms
SP2-103-014 (parameter
13).
See Notes 3, 6 and 8.
SP2-103-015 (parameter
1 ms 14).
This parameter is only valid
in Europe.
See Note 3 and 8.
SP2-103-016 (parameter
15).
20 ms
SP2-103-017 (parameter
16). See Note 3.
SP2-103-018 (parameter
17).
1 ms
SP2-103-019 (parameter
18).
SP2-103-020 (parameter
-N x 0.5 –3.5
19).
dBm
See Note 5.
NCU Parameters
Remarks
99
4