Siemens SIDOOR AT40 System Manual page 76

Description
In addition to the parameter assignment options integrated in the controller, you can also
assign parameters via additional units. The following additional units are available for
parameter assignment:
● SIDOOR SERVICE TOOL
The SIDOOR User Software is part of the SIDOOR SOFTWARE KIT. A detailed
description of the SIDOOR Software Kit is available in the SIDOOR SOFTWARE KIT
Operating Instructions (http://support.automation.siemens.com/WW/view/en/92711247).
● SIDOOR SERVICE TOOL
A detailed description of the SIDOOR Service Tool is available in the section SIDOOR
Service Tool (Page 115).
● Virtual terminal in accordance with CiA-417
A detailed description of the virtual terminal functionality in accordance with CiA-417 is
available in the section Virtual Terminal (Page 61)
Door control units SIDOOR AT40 and ATD400V for elevators
System Manual, 06/2018, A5E42192709-AC
4.7 Operating and parameterizing controllers
Controllers
75