Siemens SINAMICS G120 Hardware Installation Manual page 27

Accessing the power and motor terminals
Frame sizes A ... C have no terminal covers.
Frame sizes D ... F terminals covers are accessed by releasing the latch on the side of the
terminal covers with a suitable flat-bladed screwdriver. The cover can then be pushed
upwards and locked into position, as shown in the figure below.
Figure 4-8 Access the power and motor terminals on FSD ... FSF
Power Modules PM240
Hardware Installation Manual, 2006-04-04, A5E00807525B AA
Installing/Mounting
4.2 Electrical Installation
4-9