Screening without a Screen Termination Kit
In order to meet radiated emissions a screen termiation kit must be used. Screening without
a screen termination kit is only suitable for installation in a metal cabinet.
Should a Screen Termination Kit not be available, then the inverter can be screened using
the methodology shown in the figure below. This diagram shows both methodologies of
screening.
Note
The EMI illustration below is not to scale. The terminal cover on Frame Size D cannot be
removed. It has been removed to show the correct cable connection for the terminals.
Figure 4-11
Example of wiring to minimize the effect of EMI
Power Modules PM240
Hardware Installation Manual, 2006-04-04, A5E00807525B AA
Installing/Mounting
4.2 Electrical Installation
4-13