Siemens SINAMICS G120 Hardware Installation Manual page 84

Index
O
Operation with Residual Current Devices (RCD), 4-11
Operation with ungrounded supplies, 4-11
Options for SINAMICS G120, 3-4
Overview
Control Units, 3-1
Power Modules, 3-1
P
Power and motor terminal layout, 4-10
Power Modules
Dimension Drawings, 7-1
Dimensions and tightening torques of, 4-2, 6-4
Drill patterns for, 4-2
Fitting the Control Unit to the, 4-17
General rules for the environmental protection of, 4-
4, 5-1
Overview, 3-1, 3-2
Performance ratings, 6-12
Power range, 3-2
Specifications, 6-7
Power range of power modules, 3-2
Pulse frequency, 6-6
R
Reforming the capacitors, 4-8
Risk of electric shock, 2-2
S
Safety
Risk of Shock, 2-2
Safety notes
Commissioning, 2-3
Dismantling and disposal, 2-6
Electrical installation, 2-4, 4-5
General Warnings, Cautions and Notices, 2-1
Mechanical installation, 2-3, 4-1
Operation, 2-5
Power and motor connections, 6-5
Repair, 2-5
Safety Instructions, 2-1
Transport and storage, 2-2
Screen termination kit, 8-4
Screening methods, 4-12
Screening without a Screen Termination Kit, 4-13
Self certification, A-1
Shock and vibration, 6-2
Standards, A-6
Index-2
T
Technical construction file, A-1
Temperature, 6-1
Tightening torques for power terminals, 6-13
U
UL certified Fuses, 6-7
Underwriters Laboratories, A-6
W
Water, 6-3
Hardware Installation Manual, 2006-04-04, A5E00807525B AA
Power Modules PM240