Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
6.3.6.3
UTILITIES: LAMP
Select enable or disable, using the [↑][↓] arrow keys, then press ENTER.
This will test all of the LEDs on the front panel then resume normal operations.
6.3.6.4
UTILITIES: 1:1 MANUAL SWITCH
PRESS ENTER KEY TO FORCE UNIT INTO
STANDBY (1:1 ONLY)
If the unit is part of a 1:1 redundant pair of modems, and this unit, is currently on-line,
pressing ENTER will cause the unit to switch to standby.
6.3.6.5
UTILITIES: CIRCUIT ID
----------------------------------------
Edit the Circuit ID string, using the [←][→] and [↑] [↓] arrow keys. Only the bottom line
is available (40 characters). Use the [←][→] arrow keys to position the cursor on to the
character to be edited. Edit the character using [↑] [↓] arrow keys. The following
characters are available:
Space ( ) * + - , . / 0-9 and A-Z.
When the user has composed the string, press ENTER.
FRONT PANEL LAMP TEST: DISABLED
(ENABLED, DISABLED)
EDIT THIS MODEM'S CIRCUIT ID:
6–38
Revision 0
MN/CDM600L.IOM
Advertisement
Table of Contents
