Table of Contents
Advertisement
CDM-600L Satellite Modem
Preface
Installation
The installation and connection to the line supply must be made in compliance to local or
national wiring codes and regulations.
The CDM-600L is designed for connection to a power system that has separate ground,
line and neutral conductors. The equipment is not designed for connection to power
system that has no direct connection to ground.
The CDM-600L is shipped with a line inlet cable suitable for use in the country of
operation. If it is necessary to replace this cable, ensure the replacement has an equivalent
specification. Examples of acceptable ratings for the cable include HAR, BASEC and
HOXXX-X. Examples of acceptable connector ratings include VDE, NF-USE, UL, CSA,
OVE, CEBEC, NEMKO, DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and
SEV.
International Symbols:
Symbol
~
Telecommunications Terminal Equipment Directive
In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC,
this equipment should not be directly connected to the Public Telecommunications
Network.
Definition
Alternating Current
Fuse
xii
Symbol
Definition
Protective Earth
Chassis Ground
Revision 0
MN/CDM600L.IOM
Advertisement
Table of Contents
