Table of Contents
Advertisement
CDM-600L Satellite Modem
Preface
EMC (Electromagnetic Compatibility)
In accordance with European Directive 89/336/EEC, the CDM-600L Modem has been
shown, by independent testing, to comply with the following standards:
Emissions:
Immunity:
Additionally, the CDM-600L has been shown to comply with the following standards:
IMPORTANT
EN 55022 Class B - Limits and methods of measurement of radio
interference characteristics of Information Technology Equipment.
(Also tested to FCC Part 15 Class B)
EN 50082 Part 1 - Generic immunity standard, Part 1: Domestic,
commercial and light industrial environment.
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-9
EN 61000-4-11
EN 61000-4-13
•
Connections to the transmit and receive IF ports (Type N or Type F
connectors) should be made using a good quality coaxial cable - for
example 50 Ω or 75 Ω.
•
All 'D' type connectors attached to the rear panel must have back-
shells that provide continuous metallic shielding. Cable with a
continuous outer shield (either foil or braid, or both) must be used,
and the shield must be bonded to the backshell.
•
The equipment must be operated with its cover on at all times. If it
becomes necessary to remove the cover, the user should ensure that
the cover is correctly re-fitted before normal operation commences.
Harmonic Currents Emission
Voltage Fluctuations and Flicker
ESD Immunity
EFT Burst Immunity
Surge Immunity
RF Conducted Immunity
Power frequency Magnetic Field Immunity
Pulse Magnetic Field Immunity
Voltage Dips, Interruptions, and Variations Immunity
Immunity to Harmonics
In order that the Modem continues to comply with these
standards, observe the following instructions:
xiii
Revision 0
MN/CDM600.IOM
Advertisement
Table of Contents
