Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
CONFIG: DROP & INSERT: DROP CHANNEL TIMESLOTS
DRP-CH: 1
Select the Time-slot to edit using the [←] [→]arrow keys and edit the value using the [↓]
[↑] arrow keys, then press ENTER. The number of Channels and Time-slots shown
depends on the data rate.
CONFIG: DROP & INSERT: INSERT CHANNEL TIMESLOTS
INS-CH: 1
Select the Time-slot to edit using the [←] [→] arrow keys and edit the value using the [↑]
[↓]arrow keys, then press ENTER.
The number of Channels and Time-slots shown depends on the data rate.
If the data rate is 1920 kbps, then only the E1 formats are available, and the CHAN/TS
menus are disabled. This the 'fixed channel' mode where all timeslots are allocated in
order.
6.3.1.7
CONFIG: REFERENCE
Select either an internal 10 MHz reference clock or an external reference clock at
1, 2, 5, 10, or 20 MHz.
2
3
TS: 01
02
03
2
3
TS: 01
02
03
REFERENCE = INTERNAL
(INTERNAL, 1, 2, 5, 10, or 20 MHz)
4
04
4
04
6–20
Revision 0
MN/CDM600L.IOM
Advertisement
Table of Contents
