How To Customize Operation; How To Interpret The Alert Message; Alert Descriptions; Acknowledge The Alert - Furuno FAR-1416 Operator's Manual

1.47

How to Customize Operation

Several operation items can be customized to suit your needs.
1. Open the [MAIN MENU].
2. Select [INITIAL SETTING], then press the left button.
3. Select [OPERATION SETTING], then press the left
button.
4. Referring to the table below, select the appropriate
menu item to customize.
Menu items
WHEEL DRIVE
KEY BEEP
STERN UP RM
GUIDANCE
5. Rotate the scrollwheel to select the appropriate setting, then press the left but-
ton.
6. Close the menu.
1.48

How to Interpret the ALERT message

When an alert condition is found, the applicable alert message appears in the [ALERT]
box. A buzzer sounds for alarm and warning alerts. The [ALERT] box is shown as a
icon.
Silence the buzzer with the ALERT ACK key or select the [ALERT] box then press the
left button. The buzzer and the flashing stop but the alert indication remains on the
display until the reason for the alert is removed.
1.48.1

Alert descriptions

Alerts which can appear on this radar are listed in the table. The level of priority, from
highest to lowest, is ALARM
garding specific alarms and alarm codes, including possible remedies, see "ALERT
LIST" on page AP-13.
Note: All active-unacknowledged warnings are repeated as warnings after 60 sec-
onds (manufacturer's fixed time period).
1.48.2

Acknowledge the alert

When the alerts appear on the screen, acknowledge them following procedure.
• Press the ALARM ACK key.
Description
Sets the direction of the wheel drive
(scrollwheel).
Changes the key beep volume.
HEAD UP RM display is reversed.
Turns operational guidance on/off.
Alert icon
WARNING
1. OPERATIONAL OVERVIEW
[OPERATION SETTING]
1. BACK
2. WHEEL DRIVE
NORMAL/REVERSE
3. KEY BEEP
OFF/LOW/MID/HIGH
4. STERN UP RM
OFF/ON
5. GUIDANCE
OFF/ON
Available settings
[NORMAL], [REVERSE]
[OFF], [LOW], [MID],
[HIGH]
[ON], [OFF]
[ON], [OFF]
CAUTION. For detailed information re-
1-65