Usb Flash Memory; How To Insert The Usb Flash Memory - Furuno FAR-1416 Operator's Manual

4. Select [DELETE INTRNL MEMORY], then press the left button.
[DELETE INTRNL MEMORY] menu appears.
5. Select memory number to delete, then press the left button.
The confirmation message appears.
6. Select [RUN], then press the left button.
The progress message appears.
7. Close the menu.
6.3

USB Flash Memory

An USB flash memory allows the backup of your data. Use the USB port on the control
unit to save the data.
Note 1: USB 2.0 available.
Note 2: The waterproof rating is reduced while the USB port is used. Do not spray the
liquid on the port while the USB flash memory is connected. After operation, remount
the waterproofing cap onto the port securely.
6.3.1

How to insert the USB flash memory

1. Remove the cover from the USB port.
2. Insert the USB flash memory to the USB port.
[DELETE INTRNL MEMORY]
1. BACK
2. DEL. 1 INTRNL MEMORY
3. DEL. 2 INTRNL MEMORY
4. DEL. 3 INTRNL MEMORY
5. DEL. 4 INTRNL MEMORY
6. DEL. 5 INTRNL MEMORY
7. DEL. 6 INTRNL MEMORY
8. DEL. 7 INTRNL MEMORY
9. DEL. 8 INTRNL MEMORY
10.DEL. 9 INTRNL MEMORY
11.DEL.10 INTRNL MEMORY
SELECTED INTERNAL
MEMORY 1 WILL BE DELETED.
ARE YOU SURE?
RUN
USB connector
cover
CANCEL
6. DATA SAVE AND READ
6-5