Target Trails; Trail Time - Furuno FAR-1416 Operator's Manual

Multi-color lcd radar
Table of Contents

Advertisement

1. OPERATIONAL OVERVIEW
How to link EBL and VRM OFFSET
You can link the EBL and VRM offset to show the VRM range ring with one target as
the center-point. This may helpful if the range marker on the EBL is difficult to see.
1. Open the [MAIN MENU].
2. Select [CURSOR/OWN SHIP
MARKS], then press the left button.
3. Select [EBL/VRM], then press the left
button.
4. Select [VRM OFFSET], then press the
left button.
5. Select [LINK EBL], then press the left
button. The offset EBL is now dis-
played with the linked VRM range ring.
6. Close the menu.
1.35

Target Trails

The trails of the radar echoes of targets can be displayed in the form of synthetic af-
terglow. Target trails are shown either relative or true and can be sea or ground stabi-
lized. True motion trails require a compass signal, and position and speed data. When
the range is changed, trails are continued for targets which were already displayed in
the previous range. Newly detected targets have no trail when first detected.
1.35.1

Trail time

Trail time is the interval at which the trail is plotted on-screen. You can change the trail
time as follows:
Trail time selecting
Trail length
Normal
12 H
24 H
48 H
Using the control unit (RCU-029)
1. Place the cursor on the trail time setting inside the [TRAIL] box at the bottom-right
corner of the screen, then press the left button. You can also press the TGT
TRAIL key to cycle through and select the desired setting.
Trail time setting
The options, in order, are: [OFF]
min]
1-44
Off, 15 sec. 30 sec. 1/3/6/15/30 min., continuous
Off, 30 min. 1/3/6/12 hours, continuous
Off, 1/2/3/6/12/18/24 hours, continuous
Off, 2/4/8/16/24/36/48 hours, continuous
Trail menu
TRAIL
[15 min]
[30 min]
310
300
EBL1
EBL1
290
280
270
260
250
240
230
Trail time
R
Displayed as: "S", "G" or "R".
S: Sea stablized,
1 MIN
G: Ground stabilized,
R: Relative
[15 sec]
[30 sec]
[CONT]
[OFF]...
000
350
010
340
020
330
030
320
040
Linked VRM1
Linked VRM1
Target 2
Target 2
Target 1
Target 1
EBL origin
EBL origin
220
140
210
150
200
160
190
170
180
[1 min]
[3 min]
050
060
070
080
090
100
110
120
130
[6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Far-1426

Table of Contents