Origin Mark; How To Set The Origin Mark Type - Furuno FAR-1416 Operator's Manual

5. VIDEO PLOTTER OPERATION
MONTH] (marks enterred within the last month)
terred within the last year)
or after the current date, regardless of year), [THIS TIME] (marks enterred up to three
hours, before or after the current time, regardless of date), MM/DD to MM/DD (marks
enterred during the specified period), MM/DD to CURR (marks enterred between the
specified date and the current date).If you select a date range, set the date with the
following procedure:
1. Open the [MAIN MENU].
2. Select [MARK], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [MARK FILTERS(DATE)], then press the left button.
5. Select [START DATE], then press the left button.
6. Rotate the scrollwheel and press the left button to select a start date (AA/AA/
AA).
7. Select [END DATE], then press the left button.
8. Rotate the scrollwheel and press the left button to select a end date (BB/BB/
BB).
9. Press the MENU key to close the menu.
5.3

Origin Mark

You can enter up to 10 origin marks for dangers such as reefs. The heading and range
to the last select/entered origin mark is shown in the mark box at the bottom-left of the
screen. All origin marks are deleted when the power is turned off.
5.3.1

How to set the origin mark type

You can select the type of mark symbol for origin marks.
Type
Numerical
Symbol
1. Press the MARK SELECT key to open the [MARK COLOR/SHAPE] window.
2. Select [MARK TYPE], then press the left button.
The mark box indication changes according to the selection.
5-22
[THIS PERIOD] (marks enterred up to one month, before
Shape
[THE PAST YEAR] (marks en-
Color
Green
Light-blue