Operation; Controls - Furuno 1815 Operator's Manual

2.

OPERATION

2.1

Controls

Display unit
The display unit has six keys, two knob controls and a Cursorpad that control the ra-
dar. When you correctly do an operation, the unit beeps one time. If the operation is
incorrect, the unit beeps three times.
Control
MENU/ESC • Open/close the menu.
• Cancel selection (setting).
Cursorpad • Select menu items and options.
• Move the cursor.
ENTER • Save selected menu option.
• Acquire target to track its movement.
• Select TT or AIS target to display its data.
MODE Show the [Mode] window to access various func-
tions.
ALARM Set the target alarm, which checks for targets in the
area you select.
FUNC Do the function assigned to this key.
RANGE Rotate: Select the detection range.
(PUSH FOR Push: Set, gain, and adjust rain clutter and sea clut-
GAIN) ter.
DATA BOX Select the data box to display (at the bottom of the
screen).
Short push:
• Turn on the power.
• Adjust the brilliance of the display and the control
panel.
• Switch the radar between standby and TX.
Long push: Turn off the power.
Description
2-1