How To Start/Stop Transmission - Furuno FAR-1416 Operator's Manual

Multi-color lcd radar
Table of Contents

Advertisement

1. OPERATIONAL OVERVIEW
1426) after power is applied. The timer counts down three minutes of warm-up time.
During this period, the magnetron (transmitter tube) is warmed for transmission. When
the timer has reached 0:00, the indication "ST-BY" appears at the screen center,
meaning the radar is now ready to transmit pulses.
Now Initializing
...
In the stand-by condition, rings and TT are not shown. In the warm-up and stand-by
conditions, [ON TIME] and [TX TIME] are counted in hours and tenths of an hour, ap-
pearing at the screen center.
Password window
When the password is set from the password setting window, the confirmation window
appears when the power is applied.
Rotate the scrollwheel and press the left button to enter the password. When the
password entered matches the password registered, the confirmation window disap-
pears and the standard display appears. Refer to section 1.49 to set the password.
Note 1: Do not turn on the power directly after it has been turned off. Wait several sec-
onds before you reapply the power, to be sure the radar starts up properly.
Note 2: Parameters set on the menus are stored in a non-volatile memory (flash mem-
ory), and are preserved when the power is turned off.
Note 3: The screen refreshes slower in low ambient temperature.
1.3

How to Start/Stop Transmission

The radar is ready to transmit when the message "STBY" appears. Press the STBY/
TX key to start transmission. The radar echoes are displayed on the screen with the
previously used settings of range, brilliance, VRM, EBL and menu settings.
Press the STBY/TX key again to go into stand-by. The antenna radiator rotates when
transmitting and is stopped in stand-by. The output of the magnetron shortens with
transmission time. Keep the equipment in stand-by when its use is not required, to
lengthen the life of the magnetron.
1-4
FAR-1416/1426
MARINE RADAR
ENTER PASSWORD
PASSWORD
:
HINT FOR PASSWORD : FA92 A7FC 5ECC 0EF0 D6A3
ENTER PASSWORD WITH NUMERAL KEYS, WHEEL/LEFT BUTTON.
FORGOT THE PASSWORD? MAKE NOTE OF HINT NUMBERS AND
CONTACT US OR ONE OF OUR DEALERS.
FAR-1416/1426
MARINE RADAR
P I C : OK
Attention
Recorded charts are for reference only.
Use latest paper charts for navigation.
FAR-1416/1426
MARINE RADAR
: 0359394-XX.XX
PWR : 1451470-XX.XX
XX: Program version

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Far-1426

Table of Contents