Cisco 7010 Installation Manual page 66

Identifying the Sensing Interfaces
Modules are not hot-swappable. See
Caution
for more information.
The following illustrations of the front of the chassis indicates the location of the module slots that
contain the sensing interfaces.
Figure 4-10
Figure 4-11
Firepower 8000 Series Modules
The Firepower 8000 Series can be delivered with the following modules with configurable bypass
capability:
•
•
•
•
The Firepower 8000 Series can be delivered with the following modules without configurable bypass
capability:
•
Firepower 7000 and 8000 Series Installation Guide
4-8
Firepower 81xx Family Front Chassis View
Firepower 82xx Family and Firepower and AMP 83xx Family Front Chassis View
a quad-port 1000BASE-T copper interface with configurable bypass capability. See
Figure 4-12Quad-Port 1000BASE-T Copper Configurable Bypass NetMod, page 4-9
information.
a quad-port 1000BASE-SX fiber interface with configurable bypass capability. See
Figure 4-13Quad-Port 1000BASE-SX Fiber Configurable Bypass NetMod, page 4-9
information.
a dual-port 10GBASE (MMSR or SMLR) fiber interface with configurable bypass capability. See
Figure 4-14Dual-Port 10GBASE (MMSR or SMLR) Fiber Configurable Bypass NetMod, page 4-10
for more information.
a dual-port 40GBASE-SR4 fiber interface with configurable bypass capability. See
Figure 4-15Dual-Port 40GBASE-SR4 Fiber Configurable Bypass NetMod, page 4-10
information.
a quad-port 1000BASE-T copper interface without bypass capability. See
1000BASE-T Copper Non-Bypass NetMod, page 4-11
Chapter 4
Inserting and Removing Firepower 8000 Series Modules, page C-1
for more information.
Installing a Firepower Managed Device
for more
for more
for more
Figure 4-17Quad-Port