Cisco 7010 Installation Manual page 111

Chapter 7 Hardware Specifications
Table 7-7
LED
Right (activity)
Firepower 70xx Family Rear View
The rear of the chassis contains the system ID LED, connection ports, grounding stud, and power supply
connector.
Figure 7-4
The following table describes the features that appear on the rear of the appliance.
Table 7-8 Firepower 70xx Family System Components: Rear View
Feature
System ID LED
2.0 USB ports
VGA port
Serial port
Grounding stud
12V Power supply
connector
Firepower 70xx Family Physical and Environmental Parameters
The following table describes the physical attributes and the environmental parameters for the appliance.
Firepower 70xx Family Management Interface LEDs (continued)
Description
7010/20/30
7050
Firepower 70xx Family (Chassis: CHRY-1U-AC) Rear View
Description
Helps identify a system installed in a high-density rack with other similar systems. The blue
LED indicates that the ID button is pressed.
Allows you to attach a monitor and keyboard to the device to establish a direct
workstation-to-appliance connection.
Allows you to connect the appliance to the common bonding network. See the
Requirements for Firepower Devices, page A-1
Provides a power connection to the device through an AC power source.
Indicates activity on the port. If the light is blinking, there is
activity. If the light is off, there is no activity.
For 10Mbps links, if the light is on, there is link and activity.
If the light is off, there is no link or activity.
for more information.
Firepower 7000 and 8000 Series Installation Guide
Firepower 7000 Series Devices
Power
7-5