Transmission Information Page - Hughes HX50 Installation Manual

Transmission
Information page
The Transmission Information page shown in Figure 47 displays
remote terminal transmit data such as transmit status, the number
of packets submitted for transmission, the number of successful
transmissions, and the number of failed transmissions. Each of
these fields is described below.
Figure 47: Transmission Information page
•
Transmit status -
Click on the blue status message to display relevant Help
information. Transmit status messages on page 78 describes
the associated TxCodes in detail.
•
Number of successful transmissions -
frames transmitted to the satellite.
•
Number of failed transmissions -
frames that could not be sent. A continuously increasing
value indicates a transmit problem. However; a low number
of failed transmissions is no reason for concern, as long as the
number does not increase and the system is functioning
properly.
•
Number of packets submitted for transmission -
total amount of data queued for transmission to the satellite.
provides the status of the transmit data path.
reports the number of
reports the number of
Chapter 7 • The System Control Center
1037106-0001 Revision B.03-Draft
indicates the
77