System Information page
Connectivity test
The System Information page (shown in
the satellite modem, such as identification information, software versions, and
satellite information.
Figure 11: System Information page
To test your connectivity:
1. Click the Connectivity Test link on the side panel. The Terminal/Gateway
Connectivity Test panel appears in the center of the screen.
2. Click Start the test, as shown in
Figure 12: Starting the connectivity test
3. A progress bar appears in the Terminal/Gateway Connectivity Test panel,
indicating the test has started.
Figure
11) provides system information for
Figure
12.
Chapter 2 ● System Control Center
1040967-0001 Revision A
17