Confirming Installer Laptop And Customer Site Requirements; Installer Laptop Requirements - Hughes HX50 Installation Manual

Confirming installer
laptop and customer
site requirements
Installer laptop
requirements
Figure 9 shows the items in the HX100 installation kit.
Figure 9: HX100 installation kit components
Note: The antenna assembly is shipped in a separate box. If you
have an outdoor pointing interface (OPI), you may use it to point
the antenna. Either the installation specification or work order
should be provided to you. Download the most current sbc.cfg
file from your installation support web site.
Before installing the HX50 or HX100, you must confirm that the
installer laptop and the computer being connected to the remote
terminal meet specific requirements.
The installer laptop must meet the following requirements:
• Ethernet-enabled network interface card (NIC) and Ethernet
cable.
• Operating system with graphical user interface, such as
Windows, Linux with X Windows, or Mac OS X, with
TCP/IP protocol support and client-side DHCP enabled. See
Appendix A – Configuring a Windows computer to support
DHCP, on page 89.
Chapter 2 • Preparing for the Installation
1037106-0001 Revision B.03-Draft
13