Using the remote
terminal LEDs for
troubleshooting
Chapter 6 • Troubleshooting
58
1037106-0001 Revision B.03-Draft
the latest versions. If you don't have the latest versions, update
them and run them again.
HX50 and HX100 remote terminals have a set of five LED
indicators on their front panel that can be used for
troubleshooting and fault isolation.
Figures 37 and 38 show the front panels of the HX50 and HX100
remote terminals respectively. If you cannot access the System
Control Center, use the front panel LEDs and the procedures in
this section to troubleshoot the problem.
Figure 37: HX50 Remote terminal LEDs