Managing User Access - IBM TS2900 Setup, Operator, And Service Manual

|
|
|
Figure 43. SNMPv3 user settings
|
v Validity - Select the check box to enable and clear the check box to disable.
|
v User name - SNMPv3 unique user name.
v Authentication - Authentication algorithm: disable, MD5, or SHA. When an algorithm is specified,
an authentication password is required.
v Authentication password - enter a password (see "Configuring Password Rules Settings" on page
|
52).
|
| v Confirm - Re-enter the Authentication password to confirm it.
v Privacy - Privacy service encryption and decryption algorithm: disable, DES, or AES. When a
|
privacy algorithm is specified, a privacy password is required.
|
v Privacy password - enter a password (see "Configuring Password Rules Settings" on page 52).
|
| v Confirm - Re-enter the Privacy password to confirm it.
7. Select the event level to report in the Trap Event box.
8. Click Test to send a test trap notification to the enabled IP addresses.
9. Click Submit to enable the settings.

Managing user access

To add, modify, or remove users that are able to access the library with the Web User Interface:
|
1. In the Configure Library menu in the left navigation pane of the Web User Interface, click User
|
Access.
|
|
50
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572