IBM TS2900 Setup, Operator, And Service Manual page 236

Table 40. Ultrium Tape drive sense data (continued)
Byte
7
40 Tape
Directory
Valid
41
42
43-44
45-48
49-52
53-54
55-56
57-58
59-60
61-62
63-64
65-66
67-68
69
70-85
86-89
90-95
Table 41. Ultrium Tape drive sense data - Bytes 12 and 13
Byte 12 ASC Byte 13 ASCQ
00 00
00 01
00 02
210
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
6 5
Reserved Reserved Reserved
Host Command (SCSI Opcode)
Density Type
0: No media present
1: Gen1 (384 track)
2: Gen2 (512 track)
3: Gen3 (704 track)
Volume Label Cartridge Type
(Current LBA that would be reported in Read Position command)
Next-to-Last Error Flag Data
ERP Summary Information
Product Revision Label: YMDV
(As defined in Standard Inquiry; this is also known as the Code Level)
Description
No additional sense - The flags in the sense data indicate the reason for the
command failure
Filemark detected - A Read or Space command terminated early due to an FM. The
FM flag is set.
EOM - A Write or Write File Marks command failed because the physical end of
tape was encountered, or a Read or Space command encountered EOM. The EOM
flag is set.
Bit Address or Name
4 3
Reserved
3: Relative Target Port 3 (Library Port)
Media Type (Vendor Reserved)
Logical Block Number
Data Set Number
1st Error FSC
1st Error Flag Data
2nd Error FSC
2nd Error Flag Data
Next-to-Last Error FSC
Last Error FSC
Last Error Flag Data
LPOS Region
Reserved (0)
2 1
Relative Target Port Reporting Sense
0: Reserved
1: Relative Target Port 1 (Port 0)
2: Relative Target Port 2 (Port 1)
0